Old house decoration steps make the house no longe

2022-07-22
  • Detail

The reconstruction of old houses is a tedious and huge project, which requires not only the demolition and reconstruction of the main body, but also the optimization of space, waterway and circuit, so as to make the old houses look new. So, the old house decoration step

the reconstruction of old houses is a tedious and huge project, which requires not only the demolition and reconstruction of the main body, but also the optimization of space, waterway and circuit, so as to make the old houses look new. So, what are the decoration steps of the old house? Let's follow Xiaobian and have a look

old house decoration steps:

1. Old house decoration steps &mdash& mdash;& mdash; Main body removal

during the transformation, the main body should be removed first, including the removal of walls, floors, doors and windows, waterways and circuits, and the garbage after the demolition and transformation should be cleaned in time to keep the room clean and tidy

2. Old house decoration steps &mdash& mdash;& mdash; Structural optimization

generally, the structure of old houses is not very good, so structural optimization should be carried out during demolition and reconstruction. For example, the kitchen can be made into an open kitchen, and the squatting toilet in the bathroom can be changed into a sitting toilet. However, during optimization, the bearing wall cannot be dismantled to avoid potential safety hazards

3. Old house decoration steps &mdash& mdash;& mdash; Concealed works

concealed works are the most prone to problems in home decoration, so when doing concealed works, it is necessary to check whether the water supply, air conditioning, pipelines, lines and other equipment in the ceiling have been tested for tightness. Whether the electrical insulation and resistance tests meet the requirements, and whether the combustion materials have been treated with fire prevention

4. Old house decoration steps &mdash& mdash;& mdash; Waterway optimization

waterway reconstruction is one of the most important projects in the renovation of old houses. Therefore, the waterway should be optimized, but before optimization, the owner should first check whether the upper and lower waterways of old houses are corroded and aging. If any, it is best to replace the PPR pipe with a new one, and then conduct the closed water test after the waterway reconstruction

5. Old house decoration steps &mdash& mdash;& mdash; Circuit optimization

circuit transformation is also one of the key projects of old house transformation. It is understood that aluminum wires are generally used in the circuits of old houses, and aluminum wires are not only easy to age, but also have poor thermal conductivity, which is easy to heat up and cause fire. Therefore, when optimizing the circuit, it is safer to replace the aluminum wire with 2.5mm copper wire

6. Old house decoration steps &mdash& mdash;& mdash; Optimization of wall and floor

when optimizing the wall and floor, we should first investigate the house to see whether the floor and ceiling are flat, have cracks, fall off, sand and other phenomena. In case of the above situations, it is best to uproot the wall and ground, and then use cement mortar for foundation treatment, and then apply water-resistant putty, and then do optimization treatment

article summary: Well, the relevant knowledge of the old house decoration steps is introduced here. If you need more information, please continue to pay attention, and we will have more wonderful content for you

惠州男科医院

苏州男科医院

成都男科医院

Copyright © 2011 JIN SHI